?️ Setting up Konica Minolta bizhub c301i on macOS

⚠️ Important: You must be connected to the PET VPN if you're on WiFi, otherwise the printer will not be reachable at its network IP.

---

✅ 1. Download the Driver

1. Visit the official Konica Minolta Download Centre:
   https://www.konicaminolta.eu/eu-en/support/download-centre

2. Search for “bizhub c301i”.

3. Select your model and go to the Drivers tab.

4. Choose the correct macOS version (e.g. macOS 13–15).

5. Download the driver package (usually a dmg file e.g. IT6PSMACOS_5213AMU.dmg ).

---

? 2. Install the Driver

1. Click on the downloaded dmg file.

2. Run the included installer and follow the prompts.

3. Restart your Mac if necessary.

---

? 3. Add the Printer (via Static IP)

While connected to PET VPN, follow these steps:

1. Open System Settings > Printers & Scanners

2. Click the “+” button to add a new printer

3. Select the IP tab

4. Enter the following values:

   • Address: 128.130.140.133
   • Protocol: Internet Printing Protocol / IPP
   • Queue:
   • Name: PET Printer
   • Location: FB0316A
   • Use: Click “Select Software…”, then search and choose the Konica Minolta C301i PS driver

5. Click Add

6. The printer includes an external finisher (FS-539) which provides stapling functionality. Additional finishing options (stapling, trays, duplex unit, etc.) can be configured afterwards if needed.

---

? Notes

• Printer not showing up?

  • Ensure PET VPN is running
  • Make sure you're on the correct WiFi or Ethernet

• Need a test page?

  • Go to Printers & Scanners, select the printer, and click Print Test Page

---

? Extra Reference

Full Konica Minolta Install Guide:
https://hightechofficesystems.com/KMBS/InstallGuide/bizhub_C361i_C301i_C251i_SIG.pdf

---

Getting the printer to work is easy. The coffee machine? Now that’s the real challenge.